Mc Crypt DJ Mixer DJ-20 USB DJ-20 USB Data Sheet
Product codes
DJ-20 USB
38
Start-Up
Using the DJ Microphone
• If you want to make an announcement, press the TALKOVER (19) switch, speak into the microphone and use the
MIC LEVEL (2) control to set the volume.
• The volume ratio between microphones 1 and 2 can be set with the MIC BAL. (1) control.
• After the announcement, press the TALKOVER (19) switch again.
• Once you have made your announcement, turn the MIC LEVEL (2) control back to position „00“ to prevent any
• After the announcement, press the TALKOVER (19) switch again.
• Once you have made your announcement, turn the MIC LEVEL (2) control back to position „00“ to prevent any
distortion or background noise from being output.
Maintenance
Regularly check the safety of the mixer, for example, for damage to the power unit or the housing.
If you have reason to believe that the device can no longer be operated safely, disconnect it immediately and make
If you have reason to believe that the device can no longer be operated safely, disconnect it immediately and make
sure it is not unintentionally operated. Pull the power unit out of the socket.
It must be assumed that safe operation is no longer possible if:
• there is visible damage to the device or the power unit
• the device no longer works
• the device has been stored for a long time under unfavourable conditions or
• after the device has been exposed to extraordinary stress caused by transport
It must be assumed that safe operation is no longer possible if:
• there is visible damage to the device or the power unit
• the device no longer works
• the device has been stored for a long time under unfavourable conditions or
• after the device has been exposed to extraordinary stress caused by transport
Always observe the following safety instructions before cleaning or servicing the mixer:
Live components may be exposed if covers are opened or components are removed.
The device must be disconnected from all power sources before any servicing or repair work is
carried out.
Capacitors inside the device may still carry voltage even though they have been disconnected
from all power sources.
Only qualified experts familiar with the hazards involved and the relevant regulations may perform
repairs.
Apart from this, the device does not need any servicing. The device‘s outside should only be cleaned with a soft, dry
cloth or a brush.
Never use any aggressive cleaning agents or chemical solutions that may damage the surface of the housing.
Never use any aggressive cleaning agents or chemical solutions that may damage the surface of the housing.