Siemens SINAMICS G110 0.12 kW 1-phase frequency inverter, 230 Vac to , 6SL3211-0AB11-2BA1 6SL3211-0AB11-2BA1 Data Sheet
Product codes
6SL3211-0AB11-2BA1
Using the SINAMICS G110
04/2003
SINAMICS G110 Operating Instructions
54
6SL3298-0AA11-0BP0
4.4 Control Modes (P1300)
The various modes of operation of the SINAMICS G110 control the relationship
between the speed of the motor and the voltage supplied by the inverter. A
summary of the control modes available are listed below:
between the speed of the motor and the voltage supplied by the inverter. A
summary of the control modes available are listed below:
Linear V/f control,
P1300 = 0
Can be used for variable and constant torque applications, such as conveyors
and positive displacement pumps.
and positive displacement pumps.
Parabolic V/f control
P1300 = 2
This mode can be used for variable torque loads, such as fans and pumps.
Multi-point V/f control
P1300 = 3
This mode can be used to adapt the V/f control to special motor Torque-speed
characteristics, e.g. in the case of synchronous motors.
characteristics, e.g. in the case of synchronous motors.
4.5 Faults and Alarms
Standard Inverter
The fault state and warnings are indicated by the LED on the panel, see section
6.1 on page 57 for further information.
6.1 on page 57 for further information.
Operator Panel Fitted
If a Basic Operator Panel is fitted, the fault number and warning number, which is
held in parameters r0947 or r2110 will be displayed should a fault or warning
condition occur. For further details, please refer to the Parameter List.
held in parameters r0947 or r2110 will be displayed should a fault or warning
condition occur. For further details, please refer to the Parameter List.