Phoenix Contact 2701027 NLC-050-024D-06I-04QTP-00A nanoLine Base Unit 24ßV/DC / PNP 2701027 Data Sheet
Product codes
2701027
nanoNavigator
6-6
PHOENIX CONTACT
2373_en_B
6.5
Uploading a Project from the nanoLC
To upload a project to nanoNavigator from the nanoLC, follow these steps:
1.
If nanoNavigator isn’t currently connected to the nanoLC, follow the steps in
2.
Select “nanoLC... Upload and Merge” to upload the project. This transfers the
executable project from the nanoLC. Before beginning the upload, nanoNavigator
prompts for the project on the PC. nanoNavigator then does one of the following:
–
If the original project isn’t available, nanoNavigator creates a new project. The data
item names in this new project return to their default values.
–
If the project exists on the PC, nanoNavigator compares the two versions and dis-
plays any differences with a choice to use the logic from the nanoLC or the version
on the PC.
6.6
Downloading to the Memory Module
To download a project from nanoNavigator to the nanoLC Memory Module, follow these
steps:
1.
Attach the nanoLC Memory Module to the PC using the configured USB port (see
“Specifying the PC Connection” on page 6-3) and a standard A-B USB cable.
2.
Select “nanoLC... Memory Module... Download Project” to download the project. This
transfers the executable project to the nanoLC Memory Module.
3.
Install the Memory Module in the nanoLC and transfer the project to the nanoLC (see
the “nanoLC Quick Start Guide”).
6.7
Uploading from the Memory Module
To upload a project to nanoNavigator from the nanoLC, follow these steps:
1.
Attach the nanoLC Memory Module to the PC using the configured USB port (see
“Specifying the PC Connection” on page 6-3) and a standard A-B USB cable.
2.
Select “nanoLC... Memory Module... Upload Project” to upload the project. If there is a
project open in nanoNavigator, nanoNavigator closes it (if the project has
modifications, nanoNavigator first asks if you want to save the changes).
3.
nanoNavigator then uploads the executable project from the Memory Module, and
displays the Flow Chart Explorer.
4.
Open a flow chart.
5.
Select the "File... Save Project" menu to save the project.
If the nanoNavigator and nanoLC projects are identical, the “nanoLC... Upload and
Merge” menu is unavailable.
Although projects can be uploaded to the PC and modified from the uploaded version, the
data item names do not get downloaded, so it is important to keep a copy of the original
source project on the PC.