Phoenix Contact 2701027 NLC-050-024D-06I-04QTP-00A nanoLine Base Unit 24ßV/DC / PNP 2701027 Data Sheet
Product codes
2701027
nanoNavigator
3-10
PHOENIX CONTACT
2373_en_B
Project
In the Project group, change the project name and enter project comments. This group also
includes “Major Version” and “Minor Version” options.
nanoLC Runtime the major and minor version numbers in the nanoLC to compare the
project on the nanoLC with the project on the PC. The “Minor” version number automatically
increments whenever the project downloads or is verified. It also increments on the nanoLC
whenever a change is made (locally or by download). The “Major” version number indicates
significant changes to the project. It only changes under user control; however, whenever
the “Major” number changes, the “Minor” number resets to zero.
After selecting appropriate options, click the “OK”
button to close the dialog box. Some of
the options determine data items available in the Data Item Editor (see “Using the Data Item
Editor” on page 3-24), and other nanoNavigator behavior.
3.2.1
Configuring Base Options
The two base option slots provide flexible configuration options for the nanoLC. Some of
those options require configuration. With a configurable option selected, the “Configure”
button becomes available. This section describes the configurable options available at the
time of this writing.
Configuring RS-232 and RS-485 Options
The RS-232 and RS-485 options use the same “Configure Serial Port” dialog box
Figure 3-6
The “Configure Serial Port” dialog box
The “Configure Serial Port” dialog box has the following parameters:
–
“Node Number” selects the node number for the serial port. Valid values are from 1 to
247.
–
“Baud Rate” selects the baud rate from the drop-down list. Valid values are from 300 to
115200.