Cisco Compact Flash Memory Card, 512 MB MEM-RSP720-CF512M= User Manual

Product codes
MEM-RSP720-CF512M=
Page of 14
3-13
Cisco 7600 Series Router Supervisor Engine and Route Switch Processor Guide
OL-10100-05
Chapter 3      Installing and Configuring Route Switch Processors and Supervisor Engines
Using Flash Memory Cards
 lists the Cisco product numbers of memory cards supported on Cisco 7600 supervisor engines 
and route switch processors. 
Installing a Flash Memory Card
To install a flash memory card, follow these steps: 
Step 1
Hold the memory card with the connector end of the card toward the slot. The connector end of the card is 
opposite the end with the write-protection switch (if there is one), which is shown in 
Step 2
Slide the card into the slot until the device completely seats in the connector at the back of the slot and 
the ejector button pops out toward you. 
Caution
Do not attempt to force the memory card fully into the slot or you could damage the connector pins. 
When correctly inserted, a portion of the device remains outside the slot.
Step 3
Format the memory card the first time that it is installed in the system. 
Note
Be sure to format the memory card with the type of supervisor engine or route switch processor that the 
card is being used with. A memory card formatted for one type of supervisor engine or route switch 
processor may not work with another type. 
Table 3-3
CompactFlash Memory Cards 
Product Number
Description
RSP720 and RSP720-10GE Flash Memory Cards
MEM-RSP720-CF256M Cisco 
CompactFlash Memory Card, 256 MB 
MEM-RSP720-CF512M Cisco 
CompactFlash Memory Card, 512 MB 
MEM-RSP720-CF1G 
Cisco CompactFlash Memory Card, 1 GB
Sup720 and Sup32 Flash Memory Cards
MEM-C6K-CPTFL64M Cisco 
CompactFlash Memory Card, 64 MB
MEM-C6K-CPTFL128M Cisco 
CompactFlash Memory Card, 128 MB 
MEM-C6K-CPTFL256M Cisco 
CompactFlash Memory Card, 256 MB 
MEM-C6K-CPTFL512M Cisco 
CompactFlash Memory Card, 512 MB 
Sup2 Flash Memory Cards
MEM-C6K-ATA-1-64M 
Cisco ATA Type 1 Flash Memory Card, 64 MB