Cisco Compact Flash Memory Card, 512 MB MEM-RSP720-CF512M= User Manual

Do not remove a flash memory card while its LED light is on or the file may become corrupted. 

To remove a flash memory card, follow these steps:

Make sure that the Disk LED is off (no operations are in progress).

Press the ejector button to disconnect the memory card from the connector at the back of the slot. 

Remove the memory card from the slot and place it in an antistatic bag.

For detailed information on power management and environmental monitoring, see the Cisco 7600 
Series Router Cisco IOS Software Configuration Guide. 

This section describes the Feature Navigator and Software Advisor tools. You can use these tools to 
determine which features are supported on the router and the minimum Cisco IOS software requirements 
for the hardware installed on your router. 

You must have an account on Cisco.com to access the Feature Navigator or Software Advisor tool. 

To determine which software features are supported by your route switch processor or supervisor 
engine, use the Feature Navigator tool at the following URL: 

To check the minimum Cisco IOS software requirements for the hardware installed on your router, 
use the Software Advisor tool at the following URL: 

This tool does not verify whether the line cards in a system are compatible, but it does provide the 
minimum Cisco IOS requirements for individual line cards, modules, or options. 

See the Cisco 7600 Series Router Cisco IOS Software Configuration Guide for information about how 
to configure the supervisor engine or route switch processor for operation.