Buffalo TeraStation 5200 TS5200D0202-EU Data Sheet

Product codes
TS5200D0202-EU
Page of 181
178
Default Settings
Administrator’s Name
admin
Password
password
Shared Folders
“share” (for both Windows and Mac computers). The recycle bin is enabled on 
“share” by default.
DHCP Client
Normally, the TeraStation will get its IP address automatically from a DHCP 
server on the network.
If no DHCP server is available, then an IP address will be assigned as follows:
IP Address: 169.254.xxx.xxx (xxx is assigned randomly when booting the 
TeraStation.)
Subnet Mask: 255.255.0.0
Registered Groups
“hdusers”, “admin”, and “guest”
You cannot edit or delete these default groups.
Microsoft Network Group Name
WORKGROUP
Ethernet Frame Size
1518 bytes (Including 14 bytes of the header and 4 bytes of FCS)
AFP
Enabled
FTP
Disabled
NTP
Enabled
Print Server
Enabled
WebAccess
Disabled
Time Machine
Disabled
TeraSearch
Disabled
RAID Mode
TS5800D, TS5600D, TS5400D, TS5400R: RAID 5
TS5200D: RAID 1
Specifications
Check www.buffalotech.com for information about the latest products and specifications.
LAN Port
Interface
IEEE 802.3ab (1000BASE-T)
IEEE 802.3u (100BASE-TX)
IEEE 802.3 (10BASE-T)
Transfer Speed
1000 Mbps Full duplex (auto-negotiation)
100 Mbps Full duplex/Half duplex (auto-negotiation)
10 Mbps Full duplex/Half duplex (auto-negotiation)
Number of Ports
2 ports (supports Auto-MDIX)
Connector Type
RJ-45 8-pin
Protocol
TCP/IP
Access Method
CSMA/CD
File Sharing
SMB/CIFS, AFP, FTP, SFTP, NFS
Management
HTTP/HTTPS
Jumbo Frames
1518/4102/7422/9216 bytes
(Including 14 bytes of the header and 4 bytes of FCS)