Gigaset WLAN Repeater 108Mb S30853-H1030-R101 User Manual
Product codes
S30853-H1030-R101
17
Grep-eng_2-0.fm
10.4.13
Gigaset Repeater 2.0, IM: A31008-N602-R101-1-SU19
ENGL
ISH
Operation
LED display of functions
Left LED: display registration and operation function
Right LED: displays the handset traffic via the repeater
Reset repeater
If registration was not successful or re-registration has to be carried out for another reason, you can reset
the repeater as follows.
the repeater as follows.
¤
Press repeater button (left LED flashes slowly).
¤
Release repeater button once the left LED flashes quickly (after approximately 10 seconds).
The repeater is ready for registration once again.
Check the accessibility of a handset using a verification tone
The verification tone enables you to establish whether or not the handset is working in the extended area,
see page 16 of the Gigaset Repeater. This tone is audible on the handset every 2.5 seconds as long as a line
is allocated.
see page 16 of the Gigaset Repeater. This tone is audible on the handset every 2.5 seconds as long as a line
is allocated.
Proceed as follows:
In operation
Light off
power supply off
Constantly on
normal link to base station
Flashing
no link to base station
Not yet
registered
registered
Flashing twice per
second
second
ready for automatic registration
Light off
automatic registration unsuccessful after 5 mins
In operation
Light off
no traffic
Flashing once every 3
seconds
seconds
one handset linked via repeater
Flashing twice every 3
seconds
seconds
two handset linked via repeater
Constantly on
base station not prepared for operation with a repeater
(does not apply to base stations where Repeater Mode can be
switched off and on)
(does not apply to base stations where Repeater Mode can be
switched off and on)
Repeater:
¤
To switch on the verification tone:
Press repeater button until the right LED lights up (after approximately 20 seconds).
Press repeater button until the right LED lights up (after approximately 20 seconds).
¤
To switch off the verification tone again:
Press repeater button again until the right LED goes out (after approximately
20 seconds).
Press repeater button again until the right LED goes out (after approximately
20 seconds).
Handset:
¤
Allocate line (hold down call answer button).
¤
When you hear the verification tone, you are in the extended reception area. If you don't
hear a verification tone, move towards the repeater with the handset until you hear it.
hear a verification tone, move towards the repeater with the handset until you hear it.