Auerswald COMfortel 3200 90112 User Manual
Product codes
90112
Preparation
48
COMfortel 3200/3500 - Firmware Version 1.6A - Commissioning Instructions 03 01/13
Requirements
– One or two power supply plug(s) with type no. S110001/EU/ZIS616V
(COMfortel 3200) resp. FW7577/EU/40 (COMfortel 3500) (only one power
plug is contained in the scope of delivery)
plug is contained in the scope of delivery)
Steps to Take
1.
Only for the operation without Power over Ethernet: Remove the bridge
plug from the corresponding jack marked with
plug from the corresponding jack marked with
on the lower side of the
telephone.
2.
Only for the operation without Power over Ethernet: Insert the RJ-45 con-
nector of the power supply into the jack labelled with
nector of the power supply into the jack labelled with
on the lower side
of the telephone.
Do not set up the connection to the 230 V mains supply before the tele-
phone is actually commissioned.
Do not set up the connection to the 230 V mains supply before the tele-
phone is actually commissioned.
3.
If operated with two or three key extension modules: Insert the RJ-45 con-
nector of the power supply into the jack labelled with
nector of the power supply into the jack labelled with
on the lower side
of the key extension module.
Do not set up the connection to the 230 V mains supply before the tele-
phone is actually commissioned.
Do not set up the connection to the 230 V mains supply before the tele-
phone is actually commissioned.
Fig. 8: Connecting the power supply plugs