Rexel Prostyle Cross Cut Shredder 2101809 Data Sheet

4

Confetti Cut  

Confetti Cut  

Confetti Cut

4 x 35mm

4 x 23mm

4 x 30mm

DIN S3 

DIN S3 

DIN S3

11 sheets (80 gsm)

7 sheets (80 gsm)

5 sheets (80 gsm)

230mm  

230mm  

230mm

430 x 232 x 410mm

378 x 203 x 360mm

340 x 185 x 320mm

220-240V~50Hz

220-240V~50Hz

220-240V~50Hz

2A

1.6A

0.8A

Rexel Style RC Shredder
Ribbon Cut
5.8 mm
DIN S2
7 sheets (80 gsm)
230mm
340 x 185 x 320 mm
220-240V- 50 Hz
0.8A

1

   

2

   

3

   

Thank you for choosing this Shredder from Rexel. We are sure it will
serve you well, but please take a little time to read these instructions to
ensure you get the best out of your machine.

• Please store this instruction manual in a safe place for future

reference.

• Please pay close attention to the safety symbols on the top of the

shredder and operate the machine accordingly.

• If the shredder needs cleaning, unplug the unit from the power socket

and use a damp cloth. NB. Do not use any cleaning products to clean 
the unit.

• Do not position the unit near to an object that radiates heat.
• Do not place the unit in a damp environment.
• Take care not to splash any liquid onto the machine.
• Return the product and proof of purchase with receipt to the store at

which it was purchased if… 
- The power cable or plug is broken. 
- The machine malfunctions because liquid was accidentally spilt onto 
the machine. 
- The shredder doesn’t operate despite following the guidelines in the 
manual.

• Make sure the power cable isn’t a trip hazard.
• Please ensure the power supply is compatible with the requirements

of the machine (220-240V 50Hz).

• To avoid risk of injury, do not open the machine’s casing to attempt DIY

repair. Any attempted repair by an unqualified person will invalidate
the warranty.

m

m

How to use the shredder correctly:

1

  Take care not to insert fingers, ties or other objects into the entry

slot of the shredder.

2

  Try to avoid laminating materials, plastic bags etc. from being

passed through the shredder. This will prevent damage to the 
cutters.

3

   Do not shred wet paper as it can tangle in the cutters.

4

   Do not shred more than the stated sheet capacity in one pass.

5

   Do not shred continuously for more than 3 minutes at a time (2 

minutes Style RC). Running the unit for too long may make the motor
overheat. If the motor over heats, allow it to cool down for at least
30 minutes before resuming use.

6

  Do not use the “REV” (   ) (reverse) function if it’s not necessary. 

Over use of the “REV” (   ) function can result in shredded paper 
becoming jammed in the entry slot, which will adversely affect the
performance of the shredder.

1

   Insert plug into the AC power socket.

2

   Check the shredder bin is fully closed.

3

   Push the switch to the ON/AUTO position (standby mode)

4

  When not in use, push the switch to the O (off position)