Renkforce TU-1000 HIFI-TUNER 29265c5 Data Sheet

The Renkforce HiFi-Tuner TU-1000 serves to receive AM and FM radio stations and to display the RDS data

sent by FM stations.
The low-level audio output signal must be transferred to an external amplifier. The device is not suited for

direct connection to loudspeakers.
This product is only approved for connection to 230 V/50 Hz alternating voltage.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be

avoided under all circumstances.
Any use other than that described above will damage this product and involves the risk of short circuit,

fire, electric shock, etc.
The entire product must not be modified or converted, and the casing must not be opened.

 The lightning symbol in a triangle warns against unprotected live components or elements inside

the housing or „live“ connection points. Touching these components or connection points may

pose a danger to life.

Lines must only be connected to such connection points by specialists, or lines ready for con-

nection must be used.

The device contains no parts that require servicing by the user. Therefore, never open the de-

vice.

 The  exclamation  mark  symbol  indicates  that  the  user  must  read  these  operating  instructions

before commissioning of the device, and observe them during operation.

 The arrow symbol indicates special advice and operating information.

•  Radio
•  Remote control line
•  Cinch line
•  FM cable aerial
•  AM frame aerial
•  Operating Instructions