SOUL Run Free Pro 40738 Data Sheet

Wireless Active Earphones with Bluetooth

User GUIDE

RUN FREE PRO

ENGLISH

SPECIFICATIONS

Bluetooth Version: 
V4.0 + EDR with Apt-X decoder support

Profile: 
A2DP, AVRCP, HSP, and HFP.

Codec: 
mSBC

Range: 
10 meters (33 feet)

Charging time 

(Full charge)

: 

Approx. 2 hours

Working time:  
up to 8 hours (Varies by volume and content)

Standby time:  
up to 10 days

Dimensions: 
18H x 18W x 32D (mm) earphone size, 575mm cord length

Weight: 
17g

PAIRING 

TIP: The cable will be longer in this wearing option. You can use the clip to 
shorten the cable so it won’t interfere your training.

BATTERY 

LIFE AND 

CHARGING

1. 

Charging the battery prior to first 

use is recommended but not required. 

The  RUN FREE PRO  is pre-charged 

however initial charge will vary. 

2. 

Battery life status will be indicated at the 

top right corner of your iPhone screen.

3. 

Low battery indicator on earphones is shown 

by a Red LED light. Charge the earphone when the 

flashing light turns Red. 

4. 

When charging, Red LED light means the earphones 

are being charged.  A Blue LED light means the earphones 

are fully charged.

WATER/

SWEAT 

PROOF

1. 

The earphone unit is not 

completely waterproof where the 

sound is output. Sound may become 

muffled if water gets inside. 

2. 

When this happens, hold the earphones 

as shown and pat 10-20 times to remove the 

water. Place a dry cloth underneath the 

earphones for 2-3 hours. 

Please ensure the USB battery door is completely 

closed and locked securely before cleaning. 

NOTE: Water/sweat resistance performance of your earphones is 

based on measurements stated in this manual.  Malfunctions as a 

result by misuse by the customer are not covered by the warranty.

AUTO 

PAIRING 

MODE

REMOTE 

MIC 

CONTROLS

1. 

Paired devices will remember each other 

unless pairing information is deleted.

2. 

After initial pairing, simply press the center 

button for  3 seconds  and the earphones will be 

paired with the phone/music device automatically.  

3. 

To pair a new phone/music device, go into Bluetooth 

settings on your phone/music device, delete paired device 

and repeat the “PAIRING” instructions above. 

MULTIPOINT

(PAIRING WITH MORE 

THAN ONE DEVICE)

1. 

With SOUL multipoint technology, 

you can pair and connect up to two 

Bluetooth devices to your earphones. 

2. 

The headset must be in standby mode 

(Not connected with any device or phone)

3. 

To turn on, user can press the volume “+” and 

“Multifunction” buttons together. User will hear a 

tone which indicates the activation of this feature.

4. 

To turn off, user can press the volume “-” and 

“Multifunction” buttons together. User will hear a tone 

which indicates the deactivation of this feature.

Blue / Red 

LED light

1. 

In the “OFF” position. Turn “ON” pairing mode by pressing and holding 

the center button on the remote for 5 seconds until the Blue/Red LED light 
starts to flash on the earphones.

2. 

On your phone/music devices, turn Bluetooth on. 

It should start searching for devices.  

3. 

Find “SOUL RUN FREE PRO” and select 

(You may need to enter passcode 0000 if prompted)

4. 

Voice prompt or beeping sound will indicate that the 

RUN FREE PRO is connected.

5. 

If pairing fails, turn off the earphones by pressing on the center  

button for 5 seconds then repeat the process. 

(You may also see your phone/music devices instructions for more information)

VOLUME

UP

( > 2sec )

FORWAED

TRACK

VOLUME

DOWN

( 2sec )

BACKWARD

TRACK

MIC

ON / OFF

PLAY/

PAUSE

END

CALL

ANSWER

CALL

LAST

CALL

REDIAL

REFUSE

CALL

( double click )

( 2sec )

( 3sec / 5sec )

STEP 1

STEP 2

01

02

SR06-UG-EN-2

MULTIPOINT

OFF

MULTIPOINT

ON

* Once Multipoint is on, please be sure to repeat 
“PAIRING” instructions for both phones/devices.
**Please make sure the multipoint function is off 
when not connected to 2 phones/devices.