Funai WD6D-M100 WD6DM100 Data Sheet
Product codes
WD6DM100
38
EN
Press [VCR].
Insert a videotape with a record tab into the
cassette compartment.
cassette compartment.
3
Select the input terminal to which the external
equipment is connected (AV1 or AV2).
equipment is connected (AV1 or AV2).
Press [INPUT SELECT] repeatedly to select the external
input mode, then press [PROG.
input mode, then press [PROG.
G \ H] repeatedly to
select AV1 or AV2.
4
Select a recording speed using [REC SPEED].
Refer to “Recording Speed” on page 28 for DVD or page
70 for VCR.
70 for VCR.
5
Press [RECORD I] (DVD / VCR) on the unit to
start recording.
start recording.
6
Press the [PLAY B] button on the external
equipment.
equipment.
Press
[STOP C]
on the unit to stop
recording.
Press
[STOP
\EJECT C A]
on the unit to stop
recording.
Note
• During recording, recording will be paused when a signal
other than PAL or SECAM is detected. (See “Video Colour
System” on page 37 for details.)
System” on page 37 for details.)
• The signal from the external device will be output automatically
when the TV is connected to AV1 and the external device is
connected to AV2 using a Scart cable with its power on.
(However, it will not be output when this unit’s power is turned off.)
If you want to monitor this unit’s signal, press [DISPLAY]
or turn the external device off. (The signal from this unit can
only be monitored during playback.)
If you want to monitor the signal from other input, press
[DISPLAY], then press [INPUT SELECT] to select the
desired external input mode, then select the desired input
channel using [PROG.
connected to AV2 using a Scart cable with its power on.
(However, it will not be output when this unit’s power is turned off.)
If you want to monitor this unit’s signal, press [DISPLAY]
or turn the external device off. (The signal from this unit can
only be monitored during playback.)
If you want to monitor the signal from other input, press
[DISPLAY], then press [INPUT SELECT] to select the
desired external input mode, then select the desired input
channel using [PROG.
G \ H].
Information on DV Dubbing
This function helps you to dub the contents in the DVC (digital
video camcorder) to DVD or VCR easily. (See page 71 for
DVC to VCR Dubbing.)
You can control basic operations of the DVC from the remote
control of this unit if the DVC is in video mode.
video camcorder) to DVD or VCR easily. (See page 71 for
DVC to VCR Dubbing.)
You can control basic operations of the DVC from the remote
control of this unit if the DVC is in video mode.
1
Connect your DVC to the DV-IN jack on the front
panel using a DV cable. (Use the DV cable that
has 4-pin input jack and is compliance with the
IEEE 1394 standards.)
panel using a DV cable. (Use the DV cable that
has 4-pin input jack and is compliance with the
IEEE 1394 standards.)
2
Press [INPUT SELECT] repeatedly to select the
external input channel, then press
[PROG.
external input channel, then press
[PROG.
G \ H] repeatedly to select DV(AV3).
3
Press [DISPLAY] to display the DVC information
on the screen.
on the screen.
When the DVC is in video mode...
When the DVC is in camera mode...
The menu changes according to the mode of DVC.
Switch the mode on the DVC to video mode for the dubbing
information.
Switch the mode on the DVC to video mode for the dubbing
information.
1
DV icon
2
Indicator of active device
• With “Control” highlighted, press [ENTER
\OK] to display
the available devices to control with the remote control
of this unit. Select the device you want to operate using
[K
of this unit. Select the device you want to operate using
[K
\ L], then press [ENTER\OK].
- Select “DVD” to control this unit with the remote control
of this unit.
- Select “DVC” to control your DVC with the remote
control of this unit.
3
Recording audio mode
• “DV Audio” can be changed. With “DV Audio” selected,
press [ENTER
\OK] to display “DV Audio” menu. Select
the audio you want to output using [K
\ L], then press
[ENTER
\OK].
- Select “Stereo1” to dub the stereo sound.
- Select “Stereo2” to dub the sound that was added after
- Select “Stereo2” to dub the sound that was added after
the recording.
- Select “Mix” to dub the stereo1 and stereo2.
4
Command menu
• “Start Rec” or “Pause Rec” will appear.
5
External input channel
6
Product name of your DVC
• If the unit cannot recognise the input signal from the
DVC or if it is the unknown product, “No Device” or “****”
will appear instead.
will appear instead.
When you want to record to a videotape:
7
For disc:
For videotape:
Guide to DV and On-Screen Display
The following instructions are described with the
operations using the remote control of this unit.
operations using the remote control of this unit.
DV
AB-1234
0:12:34
1/ 1
1/ 1
D VD 2H
2:00
- R W
VR ORG
2
3
1
4
T
C
Cont r ol
D VD
D V A udio
Stereo1
Sta r t Rec
DV
AB-1234
0:12:34
1/ 1
1/ 1
- R W
VR ORG
D VD 2H
2:00
7
5
6
T
C
E9TF0ED_EN.book Page 38 Wednesday, March 17, 2010 1:32 PM