Funai WD6D-M100 WD6DM100 Data Sheet

40

EN

You can copy a DVD disc to a videotape or copy a videotape 
to a DVD disc. This function will be possible only if the DVD or 
the videotape is not copy protected.
Before dubbing, prepare for the recording on the DVDs or the 
videotape. See pages 28-29 (DVD) or page 70 (VCR). 

• The videotape’s record tab is intact.
• The videotape is long enough to record the DVD disc.

• The DVD disc is satisfied with the recording status. See 

pages 28-29.

In stop mode, press [SETUP]. Select “General 
Setting” using [K

\ L], then press [ENTER\OK].

Select “Recording” using [K

\ L], then press 

\OK].

Select “Dubbing Mode” using [K

\ L], then 

\OK].

Option window will appear.

A DVD” using [K \ L], then press 

\OK].

Press [PLAY B], and then press [PAUSE F] 
where you want to start recording.

Make sure to select a recording speed using 
[REC SPEED]. (See page 28.)

VCR to DVD duplication will start.

Press [STOP C] to stop the recording.

• During duplication, recording will be paused when a 

signal other than PAL or SECAM is detected. (See 
“Video Colour System” on page 37 for details.)

• After starting VCR to DVD duplication, the picture may 

be distorted because of the auto tracking function. This 
is not a malfunction. Be advised to play back the tape 
until the picture is stabilised, then set the starting point 
at which you want to start recording, and start VCR to 
DVD duplication.

• This unit will automatically stop the duplication if 

playback with no image detected for more than 3 
minutes during VCR to DVD duplication.

• If the playback sound mode of VCR is set to “STEREO”, 

“LEFT” or “RIGHT”, the sound mode upon dubbing is 
automatically switched to “STEREO”. If the playback 
sound mode is set to “MONO”, the sound mode upon 
dubbing is also “MONO”.

• If you set “External Input Audio” to “Stereo”, the sound is 

recorded in “Stereo” (video mode and VR mode).

• While in video mode, if you set “External Input Audio” to 

“Bilingual”, the audio set in “Bilingual Recording Audio” 
mode is recorded. While in VR mode, if you set 
“External Input Audio” to “Bilingual”, bilingual audio is 
recorded.

• The main and sub audio will be simultaneously recorded 

(VR mode). You can select audio modes during 
playback.

• If you want to watch the duplicated material, after the 

VCR to DVD duplication, press [DVD] first then press 
[PLAY B].

A VCR” using [K \ L], then press 

\OK].

Press [PLAY B], and then press [PAUSE F] at 
the point you want to start recording.

Make sure to select a recording speed using 
[REC SPEED]. (See page 70.)
Rewind or fast forward the tape to the point where you 
want to start recording.

DVD to VCR duplication will start.

Press [STOP C] to stop the recording.

• NTSC dubbing is prohibited in this unit.
• Dubbing mode is available only if the tape or disc is not 

copy-protected.

• You cannot change the output mode during VCR to DVD or 

DVD to VCR duplication.

• If you want to watch the duplicated material, after the DVD to 

VCR duplication, press [VCR] first and then press [PLAY B].

• When “DV” is selected as input, DUBBING function cannot 

be performed. DUBBING can be performed with either AV1 
or AV2 inputs.

E9TF0ED_EN.book  Page 40  Wednesday, March 17, 2010  1:32 PM