Kathrein 20210199 Data Sheet

29

Once you have reached the desired “East”/“West” limit, switch to the respective fi eld 

“Set current position for “****” border” and press the 



 button to confi rm.

If you subsequently want to delete the set limits, switch to the “Reset border positions” fi eld and press 

the 



 button to confi rm deletion of the limits. You can then set new values for the limits. Once you 

have set all the limits, press the 



 button. 

Press the 



 (green) button to move to the next menu.

The following on-screen display appears:

LNB Type:

If your reception system does not have a universal LNB, use the 



 buttons to select the LNB types 

that are used in your reception system. You can choose from the following LNB types:

- Universal 

or

- Simple 

or

- User-defi ned

LNB frequency (MHz):

You only need to specify this data if your LNB type is not “Universal”. The data required differs for the 
settings “Simple” and “User-defi ned”. On this aspect, also refer to the documentation supplied with 
your LNB.

-  Selection “Simple” LNB:  

Use the number pad to enter the LNB frequency

- Selection 

“User-defi 

ned”: 

To enter the required low, high and limit frequencies press 

 

   the 



 button. The entry is made using the number pad