Kathrein 20210199 데이터 시트
29
Once you have reached the desired “East”/“West” limit, switch to the respective fi eld
“Set current position for “****” border” and press the
button to confi rm.
If you subsequently want to delete the set limits, switch to the “Reset border positions” fi eld and press
the
button to confi rm deletion of the limits. You can then set new values for the limits. Once you
have set all the limits, press the
button.
Press the
(green) button to move to the next menu.
The following on-screen display appears:
LNB Type:
If your reception system does not have a universal LNB, use the
buttons to select the LNB types
that are used in your reception system. You can choose from the following LNB types:
- Universal
or
- Simple
or
- User-defi ned
LNB frequency (MHz):
You only need to specify this data if your LNB type is not “Universal”. The data required differs for the
settings “Simple” and “User-defi ned”. On this aspect, also refer to the documentation supplied with
your LNB.
settings “Simple” and “User-defi ned”. On this aspect, also refer to the documentation supplied with
your LNB.
- Selection “Simple” LNB:
Use the number pad to enter the LNB frequency
- Selection
“User-defi
ned”:
To enter the required low, high and limit frequencies press
the
button. The entry is made using the number pad
Connection and set-up