Renkforce Switchable socket outlet-adapter White IP20 1173536 User Manual
Product codes
1173536
Operating instructions
Switchable plug-in socket, white, 2 pins
Item no. 1173536
Intended use
A load connected to this product can be turned on or off using a rocker switch. This allows for conveniently turning
on/off loads that are not equipped with a mains switch. You will further be able save unnecessary energy costs
(depending on the load connected) caused by standby operation.
The plug-in socket must be connected to a socket with protective earth contact and requires a mains voltage of
The plug-in socket must be connected to a socket with protective earth contact and requires a mains voltage of
230 V/AC, 50 Hz.
The socket of the product can connect a load with a power input of up to 3500 W.
The product may be used in dry, closed indoor spaces only.
The safety instructions of these operating instructions must be followed without fail. Read the operating instruc-
The socket of the product can connect a load with a power input of up to 3500 W.
The product may be used in dry, closed indoor spaces only.
The safety instructions of these operating instructions must be followed without fail. Read the operating instruc-
tions carefully and keep them safe or hand them over to other users of the plug-in socket.
Any other than the intended use described above might result in product damage and furthermore cause hazards
Any other than the intended use described above might result in product damage and furthermore cause hazards
such as electric shock. The product as a whole must not be modified or altered!
This product complies with the statutory national and European requirements. All company names and product
This product complies with the statutory national and European requirements. All company names and product
names are trademarks of their respective owners. All rights reserved.
Delivery content
• Plug-in socket
• Operating instructions
• Operating instructions
Description of symbols
The symbol with the flash in a triangle indicates a risk to your health, e.g. from electric shock.
This symbol informs you about specific risks when handling, operating or using the product.
The “arrow” symbol indicates special remarks and notes for operation.
The product may be used in dry, closed indoor spaces only. It must not get damp or wet.
Safety instructions
In case of damage caused by non-observance of these operating instructions, the warranty gets void!
We are not liable for any consequential damage!
We are not liable for any consequential damage!
We are not liable for property damage or injuries caused by improper use or non-observance of
safety instructions! Such circumstances will void the warranty!
safety instructions! Such circumstances will void the warranty!
a) General
• Unauthorized modifications and/or alterations to the product are not permitted due to safety and
approval reasons (CE). Do not open/dismantle it!
• The product features a class I design. It may only be connected to and operated by a socket with
protective earth contact (e.g. wall socket).
• This product is not a toy, keep it out of the reach of children. Install the product in such a way that
children cannot reach it.
• The plug-in socket is equipped with a child lock.
Only when the two pins of a mains plug are simultaneously inserted into both openings of the
socket on front of the plug-in socket will the built-in mechanism release the openings.
Still exercise caution when using the product in the vicinity of children. Children cannot recognize
the hazards posed by improperly using the device. This poses a risk of fatal injury due to electric
shock!
• Do not leave packaging materials lying about, they may become a dangerous plaything in the
hands of children.
• Handle the product with care; impacts, blows or falling from even low heights can cause damage.
b) Location
• The product may be operated in dry, closed indoor spaces only. It must not get damp or wet!
Never install the product in the near vicinity of bathrooms, showers, swimming pools etc. There is
a risk of fatal electric shock!
• Protect the product from extreme temperatures, direct sunlight or strong vibrations.
• Use in spaces with a great amount of dust, with flammable gases, vapors or solvents is not permit-
ted. There is a danger of fire and explosion!
c) Use and operation
• Never touch, use, plug in or unplug the product with moist or wet hands. This poses a risk of fatal
injury due to electric shock! The same applies to the mains plug of the load connected to the socket
of the product.
• Never connect the product to the mains directly after moving it from a cold to a warm room (i.e.
during transportation). Condensation occurring while doing so could damage the product or cause
an electric shock!
Let the product first reach room temperature. Wait until all condensation has evaporated – this may
take up to several hours. You may only then connect the product to the mains and start using it.
• Always hold the designated surface when pulling the mains plug from the plug-in socket. Never
pull the cable when disconnecting plugs from the socket of the product.
• Do not overload the product. Observe the maximum permissible connecting power as provided
under “Technical data”.
• Do not connect in series! That could cause overloading of the plug-in socket!! This poses a fire
hazard!
• Do not operate when covered! Higher connecting power causes the plug-in socket to warm up,
which could result in overheating and even fire if the product is covered!
• Zero potential only if plug is disconnected!
• Do not use the product if damaged. This poses a risk of fatal injury due to electric shock!
If damaged, dispose of the product in an environmentally friendly manner.
Safe operation is no longer guaranteed when:
- the product shows obvious damage
- the product does not function properly or at all (emitting smoke or burnt smell, audible cracking
noise, discoloration of the product or adjacent surfaces)
- the product has been stored under adverse conditions
- serious stress during transport has occurred.
• Always unplug the plug-in socket from the mains (e.g. wall socket) before cleaning or when not
using it for a longer period of time (e.g. during storage).
• Never pour liquids above or near the product. This poses a great risk of fire or fatal injury due to
electric shock.
If for any reason liquid has entered the interior of the product, immediately disconnect the power
supply of the connecting mains socket (e.g. turn off the fuse/safety device/ground fault circuit
interrupter of the respective circuit). Do only then disconnect the plug-in socket from the mains
socket and consult an expert. Discontinue use of the product.
• For installations in industrial facilities, follow the accident prevention regulations for electrical sys-
tems and equipment of the government safety organization or the corresponding authority for your
country.
• Use the product in temperature climates only, do not use in the tropics.
• If you have any further questions that have not been considered in these operating instructions,
please contact us or any other expert.
First time use, operation
Observe the safety instructions and all other information provided in these operating instructions!
• Connect the plug-in socket to a properly installed mains socket with protective earth contact (e.g. wall socket).
• Connect the load to the socket located on the front of the plug-in socket.
• You may then use the rocker switch to turn on or off the load connected to the plug-in socket. When turning off,
• Connect the load to the socket located on the front of the plug-in socket.
• You may then use the rocker switch to turn on or off the load connected to the plug-in socket. When turning off,
both poles (L/N) are disconnected.
Switch position “I” = turned on
Switch position “O” = turned off
When turned on, the indicator lamp inside the switch lights up.
Maintenance and cleaning
• This product does not require maintenance. There are no user-serviceable parts inside the product. Therefore,
do never open/dismantle the product. Have maintenance and repairs done by qualified experts or repair shops
only.
• Disconnect the product from the mains before cleaning; unplug the plug-in socket from the mains socket.
Then disconnect the connected load from the plug-in socket.
• To clean the product, a dry, soft and clean cloth is sufficient.
You can use a long-haired, soft and clean brush and a vacuum cleaner to remove dust.
Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can cause
Then disconnect the connected load from the plug-in socket.
• To clean the product, a dry, soft and clean cloth is sufficient.
You can use a long-haired, soft and clean brush and a vacuum cleaner to remove dust.
Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can cause
damage to the housing and malfunctioning.
Disposal
Do not dispose of the product with your household waste.
Please dispose of the device at the end of its service life in accordance with legal regulations; e.g.
return the device to a public collection point.
Technical data
Operating voltage.....................................................230 V/AC, 50Hz
Connecting power....................................................max. 3500 W
Mains switch ............................................................2 pins (L/N)
Child lock ...................................................................yes
Protection class .......................................................IP20
Installation location .................................................Dry indoor spaces only
Dimensions (L x W x H) ...........................................79 x 56 x 77 mm
Connecting power....................................................max. 3500 W
Mains switch ............................................................2 pins (L/N)
Child lock ...................................................................yes
Protection class .......................................................IP20
Installation location .................................................Dry indoor spaces only
Dimensions (L x W x H) ...........................................79 x 56 x 77 mm
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.
© Copyright 2014 by Conrad Electronic SE.
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.
© Copyright 2014 by Conrad Electronic SE.