Puls DIMENSION YR40 DIN rails power supply din rail power supply U YR40.241 Data Sheet
Product codes
YR40.241
YR40.241
Y-Series
24-28V,
40A,
D
UAL
R
EDUNDANCY
M
ODULE
R
EDUNDANCY
M
ODULE
For N+1 and 1+1 Redundant Systems
Dual Input with Single Output
Minimal Losses - Mosfets Instead of Diodes
Only 72mV Voltage Drop at 20A Output Current
Only 2.15W Loss at 20A and 6.3W at 40A Output Current
160% (65A) Peak Load Capability
Reverse Polarity Protected Input
Full Power Between -40°C and +70°C
Width only 36mm
Rugged Metal Housing
Easy Wiring:
Dual Input with Single Output
Minimal Losses - Mosfets Instead of Diodes
Only 72mV Voltage Drop at 20A Output Current
Only 2.15W Loss at 20A and 6.3W at 40A Output Current
160% (65A) Peak Load Capability
Reverse Polarity Protected Input
Full Power Between -40°C and +70°C
Width only 36mm
Rugged Metal Housing
Easy Wiring:
Distribution Terminal for Negative Pole Included
3 Year Warranty
1/17
G
ENERAL
D
ESCRIPTION
The YR40.241 is a redundancy module, which can be
used to build 1+1 and N+1 redundant systems. It is
equipped with two input channels which can be
connected to 20A power supplies and one output which
can carry nominal currents up to 40A.
used to build 1+1 and N+1 redundant systems. It is
equipped with two input channels which can be
connected to 20A power supplies and one output which
can carry nominal currents up to 40A.
The novelty of this redundancy module is the utilization
of mosfets instead of diodes for the decoupling of the
two input channels. This reduces the heat generation
and the voltage drop between input and output. The
redundancy module does not require an additional
auxiliary voltage and is self-sufficient even in case of a
short circuit across the output.
of mosfets instead of diodes for the decoupling of the
two input channels. This reduces the heat generation
and the voltage drop between input and output. The
redundancy module does not require an additional
auxiliary voltage and is self-sufficient even in case of a
short circuit across the output.
Due to the low power losses, the unit is very slender and
only requires 36mm width on the DIN-rail. Large
connection terminals allow for a safe and fast
installation with a large international approval package.
This unit is suitable for nearly every application.
only requires 36mm width on the DIN-rail. Large
connection terminals allow for a safe and fast
installation with a large international approval package.
This unit is suitable for nearly every application.
S
HORT
-
FORM
D
ATA
Input voltage
DC 24-28V
±30%
Input voltage
range
range
16.8–36.4Vdc
Input current
2x 0–20A
continuous
2x 20–32.5A
for 5 seconds
Output current
0–40A
continuous
40–65A
for 5 seconds
65A
at cont. overload/
short circuit
short circuit
Input to output
voltage drop
voltage drop
typ. 72mV
typ. 112mV
typ. 140mV
typ. 112mV
typ. 140mV
input: 2x10A
input: 1x20A
input: 2x20A
input: 1x20A
input: 2x20A
Power losses
typ. 700mW
at no load
typ. 2.15W
input: 2x10A
typ. 2.65W
input: 1x20A
typ. 6.3W
input: 2x20A
Temperature range -40°C to +70°C
operational,
no de-rating req.
no de-rating req.
Dimensions
36x124x127mm
*)
WxHxD
*) plus 4mm in depth for the screw terminal
O
RDER
N
UMBERS
Redundancy
YR40.241
24-28V Standard unit
Module
Accessory ZM1.WALL
Wall/panel
mount
bracket
ZM2.WALL
ZM2.WALL
Wall/panel
mount
bracket
ZM11.SIDE
ZM11.SIDE
Side
mount
bracket
M
ARKINGS
IND. CONT. EQ.
UL 508
UL 60950-1
Class I Div 2,
pending
ATEX
II 3G Ex nAC II T3
pending
Marine, pending
EMC, LVD
Oct. 2010 / Rev. 1.0 DS-YR40.241-EN
All parameters are specified at 24V, 40A output current, 25°C ambient and after a 5 minutes run-in time unless otherwise noted
All parameters are specified at 24V, 40A output current, 25°C ambient and after a 5 minutes run-in time unless otherwise noted
www.pulspower.com Phone +49 89 9278 0 Germany