Futaba Hendheld RC 2.4 GHz No. of channels: 14 1-F8075 Data Sheet

Product codes

1-F8075

116

<Model Menu (Airplane/Glider Functions)>

AIL 3

(Chip Aileron)

AIL 4

(Chip Aileron)

AIL1

(Main Aileron)

AIL 2

(Main Aileron)

FLP 2

(Camber Flap)

FLP 1

(Camber Flap)

ELEVATOR

(ELEVATOR 2)

V-TAIL

AILVATOR

FLP 3

(Brake Flap)

FLP 4

(Brake Flap)

RUDDER 2

Winglet

RUDDER 1

RUDDER

(RUDDER 2)

Winglet

at Flying wing

( )

ELEVATOR

ELEVATOR 2

(AILERON 5)

(AILERON 6)

[Glider, 4 flaps]
AIL to RUD

This mix is used when you want to coordinate

the rudder with aileron operation for banking at

shallow angles. [Airplane/glider, general]

RUD to AIL

This function is used when you want to mix

the ailerons with rudder input. Rudder is applied

during rolling maneuvers such as knife edge flight.

[Airplane/glider, general]
CAMBER MIX

This mix adjusts the camber and corrects the

elevators. [Airplane/glider, 2 ailerons or more]
ELE to CAMBER

This mix is used when you want to the mix

camber flaps with elevator to increase the lift of the

model. [Airplane/glider, 2 ailerons or more]
CAMB.FLP to ELE

This mix is used to correct for changes in attitude

when the camber flaps are utilized. [Airplane/

glider, 2 ailerons + 1 flap or more]
BUTTERFLY (Crow)

This function is used to quickly slow the aircraft

and/or reduce the altitude. [Glider, 2 ailerons or

more (Flying: 2 ailerons + 1 flap or more)]
TRIM MIX

The ailerons, elevators, and flaps trim offset rate

can be accessed by selecting a switch or condition

selection as desired. [Glider, 2 ailerons or more]

AIRBRAKE

This function is used when airbrakes are

necessary when landing or when diving, etc. during

flight. (Airplane, 2 ailerons or more)
GYRO

This is a dedicated mix when a GYA Series gyro

is used. [Airplane/glider, general]
V-TAIL

This function incorporates the elevators and

rudder input for use with V-tail models. [Airplane/

glider, V-tail specifications]
AILEVATOR (DUAL ELEVATOR)

This function adjusts the elevators and ailerons

of models with elevator specifications. [Airplane/

glider, ailevator specifications]
WINGLET

This function adjusts the left and right rudders

of winglet models. [Airplane/glider, winglet

specifications]
MOTOR

This function adjusts the operation speed when

the motor of an F5B or other such EP glider is

started by a switch. [Airplane/glider, general]
RUD to ELE

This function is used to correct rolling maneuvers

such as, knife edge flight. [Airplane, general]
SNAP ROLL

This function selects the snap roll switch and

adjusts the amount of servo input. Servo speed can

also be adjusted. [Airplane general]