Futaba Hendheld RC 2.4 GHz No. of channels: 14 1-F8075 Data Sheet
Product codes
1-F8075
40
<Receiver and Servo Installation>
RECEIVER AND SERVO INSTALLATION
Receiver switch
Receiver battery
Charging port
Servos
R7008SB
(output connector section)
•CH1~6: Output connectors 1~6
•7/B: Output connectors 7 and Power supply
•8/SB: Output connectors 8 or S.BUS system
•S.BUS2: S.BUS2 system
•7/B: Output connectors 7 and Power supply
•8/SB: Output connectors 8 or S.BUS system
•S.BUS2: S.BUS2 system
CH1~8,
S.BUS/(2),
B
Receiver and servos connection diagram
Always connect the necessary number of servos.
The receiver channel assignment depends on the
The receiver channel assignment depends on the
model type. See the Servo connection by model
type tables.
Receiver and servos connection
Connect the receiver and servos in accordance with the connection diagram shown below. Always read
the section [Before using]. When mounting the receiver and servos to the fuselage, connect the necessary
points in accordance with the model's instruction manual.