Digitus DN-13020 User Manual

 
 

28 

 

 

 

This chapter describes how to upgrade firmware. Please follow one of the following 
Procedures:  
 
 

 

1.  Open Control Center. It will automatically search the existing Servers and   

display their statuses.   

2.  Select the Server that you want to upgrade the firmware.   

Double click the selected Server to get the serve’s main web page. 

3.  Click CONFIG icon. 
4.  Login the Server with Administrator (default: admin) and Password (default: admin). 
5. Click 

Maintenance. 

6.  Click Upgrade Firmware. 
7.  Click Browse button to choose the file of new firmware. 
8.  Click Upload button to start firmware upgrade. 
9.  Wait for 20 seconds for system reboot. 
 
 

1.  Plug in the power adaptor while pressing the Init button until LED indicators of USB1 and 

USB2 blink. (For 1-port model, only USB1 LED will blink.) Please note that after that, 
the Server will operate using the factory default values after restarting, i.e., your 
Server’s configuration will recover to Factory Default values. 

2.  Run the TFTP client Tool: Image Burner, from Windows Start menu. 

3. Click 

Open Image to open your new firmware. Please note that you must configure   

your PC’s TCP/IP such that PC and the Server belong to the same LAN, i.e. PC’s IP   
is 192.168.1.xxx and subnet mask is 255.255.255.0. 

 

4. Click 

Upload Image. 

5. Wait 

for 

Image Uploading to finish and then click Close. 

6.  Plug-off the power adapter and then plug-in the power adapter to restart the Server.