Digitus DN-13020 User Manual
29
10. The Init Button
The Init button is used for maintenance: Simultaneously press Init button and turn on (by
plugging in the power adaptor) the Server until USB1 and USB2 LED indicators
simultaneously blink. (For 1-port model, only USB LED indicator will blink.) After that, the
Server will do the following tasks:
A. Perform a Factory Default restoration of the server, which will restore most of the
plugging in the power adaptor) the Server until USB1 and USB2 LED indicators
simultaneously blink. (For 1-port model, only USB LED indicator will blink.) After that, the
Server will do the following tasks:
A. Perform a Factory Default restoration of the server, which will restore most of the
parameters and settings to factory default values.
B. Perform a TFTP server. You can upgrade new firmware using any TFTP client tool.
Note: After performing the tasks mentioned above, you have to plug off the power
Note: After performing the tasks mentioned above, you have to plug off the power
adaptor and then plug in the power adaptor to restart the Server.