Edimax ES-3305P User Manual
4
Back Panel
5 Port Fast Ethernet Desktop Switch
8 Port Fast Ethernet Desktop Switch
Operating Environment
This switching hub must be installed and operated within the limits of the
specified operating temperature 0~40°C (32~104°F) and humidity (10~90%
Non-condensing).
- Do not place objects on top of the unit.
- Do not obstruct any vents at the sides of the unit.
- Do not position the unit near any heating source such as a heater, radiator or
This switching hub must be installed and operated within the limits of the
specified operating temperature 0~40°C (32~104°F) and humidity (10~90%
Non-condensing).
- Do not place objects on top of the unit.
- Do not obstruct any vents at the sides of the unit.
- Do not position the unit near any heating source such as a heater, radiator or
in direct exposure to sun.
- Take care to ensure the unit does not come into contact with water. Consider
using a dehumidifier to reduce humidity and prevent moisture entering the
unit.
unit.
Connecting to network devices
The RJ-45 ports on the switch support Auto-MDI/MDI-X which allows both
straight-through or cross-over type cables to connect this switch to a workstation
or hub.
Connect one end of the network cable to the RJ-45 port on the rear panel, and
connect the other end of the network cable to the RJ-45 port on the network
device. Follow the same procedure to connect all RJ-45 ports of the switch.
5V DC Power Port
RJ-45 Ports 1 - 5
RJ-45 Ports 1 - 8
5V DC Power Port