Gigabyte GA-X99-UD4 Data Sheet

Page of 128
Configuring SATA Hard Drive(s)
- 78 -
Delete RAID Volume
To delete a RAID array, select Delete RAID Volume in MAIN MENU and press <Enter>. In the DELETE 
VOLUME MENU
 section, use the up or down arrow key to select the array to be deleted and press <Delete>. 
When prompted to confirm your selection (Figure 19), press <Y> to confirm or <N> to abort.
Figure 19
Acceleration Options
This option allows you to view the status of your accelerated drive/volume (Figure 20) created using the Intel
®
  
IRST utility. In case you are unable to run the Intel
®
 IRST utility due to an application error or operating system 
issue, you will need to remove acceleration or manually enable synchronization (Maximized mode only) using
this option in the RAID ROM utility. 
Steps:
Select Acceleration Options in MAIN MENU and press <Enter>. 
To remove the acceleration, select the accelerated drive/volume, press <R>, and press <Y> to confirm.
To synchronize data from the cache device to the accelerated drive/volume, press <S> and press <Y> to confirm.
Figure 20
Intel(R) Rapid Storage Technology - Option ROM - 13.1.0.2126
Copyright (C)  Intel Corporation.   All Rights Reserved.
Deleting a volume will reset the disks to non-RAID.
WARNING:
  ALL DISK DATA WILL BE DELETED.
(This does not apply to Recovery volumes)
   [hi]-Select  
[ESC]-Exit 
[DEL]-Delete Volume
[ HELP ]
[ DELETE VOLUME MENU ]
Name 
Level 
Drives 
Capacity  Status Bootable
Volume0 
RAID0(Stripe) 
    2 
931.5GB 
Normal
 Yes
ALL DATA IN THE VOLUME WILL BE LOST!
(This does not apply to Recovery volumes)
Are you sure you want to delete "Volume0"? (Y/N) :
[
 DELETE VOLUME VERIFICATION
 ]
Intel(R) Rapid Storage Technology - Option ROM - 13.1.0.2126
Copyright (C)  Intel Corporation.   All Rights Reserved.
Press 's'  to synchronize data from the cache device to
the Accelerated Disk/Volume
Press 'r' to remove the Disk/Volume Acceleration
WARNING:
  IT IS RECOMMENDED THAT YOU PERFORM A SYNCHRONIZATION
BEFORE REMOVING ACCELERATION
     [hi]-Select 
 
[ESC]- Previous Menu 
[ HELP ]
[ ACCELERATION OPTIONS ]
Name  Type 
Capacity Mode  Status 
DISK PORT 3 
Non-RAID Disk 
465.7GB 
Enhanced 
In Sync