Gigabyte GA-X99-UD4 Data Sheet

Configuring SATA Hard Drive(s)

- 80 -

Rebuilding is the process of restoring data to a hard drive from other drives in the array. Rebuilding applies only 

to fault-tolerant arrays such as RAID 1, RAID 5 or RAID 10 arrays. The procedures below assume a new drive 

is added to replace a failed drive to rebuild a RAID 1 array. (Note: The new drive must have equal or greater

capacity than the old one.)

Turn off your computer and replace the failed hard drive with a new one. Restart your computer.

 • Enabling Automatic Rebuild

Step 1:

When the message "Press <Ctrl-I> to enter Configuration Utility" appears, press <Ctrl> + <I> to enter the RAID

Configuration Utility. The following screen appears after you enter the RAID Configuration Utility.

Step 2:

Select the new hard drive to add into the array to be rebuilt and press <Enter>. The following screen appears, 

indicating that an automatic rebuild will be performed after you enter the operating system. If you do not enable 

automatic rebuild on this stage, you have to manually rebuild the array in the operating system (see the next

page for more details).

Intel(R) Rapid Storage Technology - Option ROM - 13.1.0.2126

Copyright (C)  Intel Corporation.   All Rights Reserved.

3.  Reset Disks to Non-RAID

4. Exit

RAID Volumes :

None defined.

Physical Disks :

ID  

Drive Model 

 

Serial # 

 

Size 

Type/Status(Vol ID)

0   

Hitachi HDS72105 

JP1532FR3BWV7K 

465.7GB

 

Member Disk (0)

1   

Hitachi HDS72105 

JP1532FR3ABMPK 

465.7GB

 

Non-RAID Disk

   [hi]-Select  

[ESC]-Exit 

[ENTER]-Select Menu

[ DISK/VOLUME INFORMATION ]

[ MAIN MENU ]

1.  Create RAID Volume

2.  Delete RAID Volume

[ 

DEGRADED VOLUME DETECTED

 ]

 [hi]-Previous/Next [ENTER]-Select  [ESC]-Exit

"Degraded volume and disk available for rebuilding detected. Selecting 

a disk initiates a rebuild. Rebuild completes in the operating system.

Select the port of the destination disk for rebuilding (ESC to exit):

  ID  Drive Model  

 

Serial #      

 

Size

  1 

Hitachi HDS721050CLA   

JP1532FR3ABMPK   

465.7GB

Intel(R) Rapid Storage Technology - Option ROM - 13.1.0.2126

Copyright (C)  Intel Corporation.   All Rights Reserved.

RAID Volumes :

ID   

Name  

 

Level 

 

Strip 

Size 

Status 

Bootable

0  

Volume0   

RAID1(Mirror) 

N/A 

465.7GB 

Rebuild

 Yes

Physical Devices :

ID  

Devices Model   

Serial # 

 

Size 

Type/Status(Vol ID)

0   

Hitachi HDS72105 

JP1532FR3BWV7K 

465.7GB

 

Member Disk (0)

1   

Hitachi HDS72105 

JP1532FR3ABMPK 

465.7GB

 

Member Disk (0)

   [hi]-Select  

[ESC]-Exit 

[ENTER]-Select Menu

[ DISK/VOLUME INFORMATION ]

Volumes with "Rebuild" status will be rebuilt within the operating system.

[ MAIN MENU ]

4.  Recovery Volume Options

5.  Acceleration Options

6. Exit

1.  Create RAID Volume

2.  Delete RAID Volume

3.  Reset Disks to Non-RAID