Kathrein 20210165 Data Sheet
49
Connection and set-up
Inserting the CI module into the CI
The Common Interface (CI+)
of the UFS 925 is suitable for the use of two CI modules. It is located
on the front of the receiver (under the fl ap). The CI module
accepts the Smartcard
(chip contacts
pointing upwards and towards the socket board) and is then inserted in the CI+ insert position
.
The Smartcard should be inserted into the CI module without exerting excessive force. The same applies
to inserting the CI module into the CI+ insert position!
to inserting the CI module into the CI+ insert position!
Do not use excessive force and follow the instructions supplied with the Smartcard and the CI module.
To remove the CI module press the corresponding ejection button
and pull it straight out backwards.
Inserting the Smartcard and the CI Module