Superrollo Professional TA50 Garage Door Motor 50kg SR40050 Data Sheet
Product codes
SR40050
49
EN
(A) Installation of the header bracket (1)
NOTE
The header bracket
(1) must be aligned with the mid-
point of the door.
Key
1 =
Header bracket
2 =
Screw (6 x 80 mm) with hexagon nut
3 =
Hexagon screw (8 x 60 mm)
4 =
Rail
1.
2.
3.
1
2
3
4
Mark out the position of the header bracket
(1) and drill the mounting holes (e.g. with a
10 mm masonry drill bit).
Screw the header bracket (1) tight with the
Screw the header bracket (1) tight with the
enclosed hexagon screws (8 x 60 mm).
Then fix the rail (4) with the enclosed
Then fix the rail (4) with the enclosed
hexagon screw (6 x 80 mm) to the header
bracket (1).
(B) Installation of the fixing bracket (5) at the door operator head (7)
1.
2.
Push the fixing bracket (5) onto the rail (4), as
close to the door operator head (7) as possible.
Mark the mounting holes for the fixing
Mark the mounting holes for the fixing
bracket (5).
In order to do so, lift the entire construction and push
In order to do so, lift the entire construction and push
it against the ceiling.
NOTE
NOTE
Ensure that the rail
(4) is aligned with the centre of
the door.
Drill the mounting holes (e.g. with a 10 mm
masonry drill bit).
Finally screw the fixing bracket (5) to the ga-
Finally screw the fixing bracket (5) to the ga-
rage ceiling with the enclosed hexagon screws
(8 x 60 mm).
5
6
3.
7
4
Key
4 =
Rail
5 =
Fixing bracket
6 =
Hexagon screw (8 x 60 mm)
7 =
Door operator head
4.