Superrollo Professional TA50 Garage Door Motor 50kg SR40050 Data Sheet

Product codes

SR40050

Screw the door bracket (8) tight with

the enclosed self-tapping hexagon screws

(8 x 15 mm).
Finally, fix the door connector (12) to the

door bracket (8) with the enclosed bolt (9).
NOTE

A straight door connector is supplied pre-assembled,

and this is permanently fixed to the rail.
If you wish to use the bent door connector enclosed (de-

pending upon your door particular configuration), you must

attach this with two hexagon screws (8 x 20) to the straight

door connector

(12).

(C) Installation of the door bracket (8)

Fit the middle support (13) clip at a suitable

place, as near as possible to the middle point

between the door and the door operator head.

Key

13 =

Middle support clip

14 =

Hexagon screws (8 x 60 mm)

(D) Installation of the middle support clip (13)

Finally, secure the bolt (9) by attaching the se-

curing bolt (11) to prevent it from slipping out.