Superrollo Professional Universal belt winder GW60 including sun sensor SR10060 SR10060 Data Sheet
Product codes
SR10060
94
i
EN
21. Surface-mounted belt winders, removing the belt in the event of unit failure
In the event that the belt winder
fails and the drive no longer runs,
you can fully remove the belt from
the belt winder without having to
cut it with help of the drive release
mechanism. In order to do so, you
must first dismantle the surface-
mounted belt winder.
fails and the drive no longer runs,
you can fully remove the belt from
the belt winder without having to
cut it with help of the drive release
mechanism. In order to do so, you
must first dismantle the surface-
mounted belt winder.
Remove the power supply from
the socket.
the socket.
Hold down the drive release mech-
anism and subsequently pull the
belt as far as possible out of the
belt winder.
Release the belt from the fixing
hook and pull it completely out of
the belt winder.
anism and subsequently pull the
belt as far as possible out of the
belt winder.
Release the belt from the fixing
hook and pull it completely out of
the belt winder.
4.
3.
1.
2.
Drive
release
Release the drive with the help
of a pointed instrument (e. g. a
paper clip).
of a pointed instrument (e. g. a
paper clip).
CAUTION
Hold on to the belt, as otherwise
the roller shutters can fall down in
an unrestrained manner.
Hold on to the belt, as otherwise
the roller shutters can fall down in
an unrestrained manner.
When pressing, you will have to
overcome a small amount of re-
sistance.
overcome a small amount of re-
sistance.
Drive
release
Finally, dismantle the surface-
mounted belt winder as previously
described on page 93.
mounted belt winder as previously
described on page 93.