TP-LINK Single Parallel Port Fast Ethernet Print Server TL-PS110P User Manual

 

18 

8.  Then the print server web management page will appear, with which you can configure all 

print server settings. 

 

Figure 3-29 

9. Click 

“Setup” and then choose “TCP/IP”. Check “Use the following TCP/IP Settings” radio 

button and then fill in the following parameters. 

¾  IP Address: Specify an IP address for your print server. The IP address must be within 

the same subnet as your Router. For example, if the LAN IP address of your Router is 

192.168.1.1, the IP address should be set to 192.168.1.X (1<X<255). 192.168.1.10 is 

suggested. 

¾  Subnet Mask: Enter the subnet mask of your network. 

¾  Default Router: Enter the LAN IP address of your wireless router or access point. Here 

takes 192.168.1.1 for example.