TP-LINK Single Parallel Port Fast Ethernet Print Server TL-PS110P User Manual

 

20 

 

Figure 3-31 

11.  Enter the “Internet Protocol (TCP/IP) Properties” page as shown in Figure 3-32. Fill in the 

following parameters. 

¾  IP Address: Specify an IP address for your adapter. The IP address must be within the 

same subnet as your Router. For example, if the LAN IP address of your Router is 

192.168.1.1, the IP address should be set to 192.168.1.X (1<X<10 or 10<X255, for 

192.168.1.10 has been specified for your print server). Here we take 192.168.1.101 for 

example. 

¾  Subnet Mask: Enter the subnet mask of your network. 

¾  Default Gateway: Enter the LAN IP address of your wireless router or access point. Here 

takes 192.168.1.1 for example.