TP-LINK Single Parallel Port Fast Ethernet Print Server TL-PS110P User Manual

 

52 

Print jobs are sent to the print queue successfully, but fail to be sent to the printer. 

1.  The Print server Name/Print Queue configuration is incorrect. 

2.  The Print server name specified and stored in the print server memory doesn’t match the 

same one. 

3.  The power adapter connected to the print server is loose or disconnected. 

4.  The printer is off-line, jammed or out of paper. 

1.  Check all the information in print port setting. 

2.  Check all the information of the print server by running PSAdmin. 

3.  Check to see that if the power adapters are properly connected. 

4.  Recheck the print server connection by running the PSAdmin. 

Print jobs start printing, but print very slowly or print unknown characters. 

A printer driver is missing or is incompatible with that printer.    Using a print driver that is not 

specific for the printer can cause printing errors. Install the proper printer driver. If these 

printer drivers are not available to you, please contact your printer manufacturer. 

The upgrading process indication bar stops and does not seem to proceed again while 

upgrading the print server. 

There might be a network problem. This causes the upgrading procedure to fail.