Graupner Hendheld RC 2.4 GHz No. of channels: 12 33124 Data Sheet
Product codes
33124
195
Detail program description - Control adjust
affects both servos. If the rudders are also required to
defl ect outwards when the airbrakes are activated, then
you should assign the C1 stick (transmitter control 1) to
input 8 on the "Control adjust" menu. Finally, move to
the "Offset" column and adjust the offset value until both
rudders return to the neutral position. You may also need
to "play" a little with the offset and travel adjustment
settings.
defl ect outwards when the airbrakes are activated, then
you should assign the C1 stick (transmitter control 1) to
input 8 on the "Control adjust" menu. Finally, move to
the "Offset" column and adjust the offset value until both
rudders return to the neutral position. You may also need
to "play" a little with the offset and travel adjustment
settings.
Tip:
You can use the "Servoanzeige" menu to check
all of the settings made in this way. This menu
can be accessed from almost any other menu by
simultaneously pressing the
You can use the "Servoanzeige" menu to check
all of the settings made in this way. This menu
can be accessed from almost any other menu by
simultaneously pressing the
keys on the left touch
pad.