Graupner Hendheld RC 2.4 GHz No. of channels: 12 33124 Data Sheet

222 Detail program description - Control adjust

After selection of the desired menu line with the arrow 
keys 

 of the left or right touch pad …

… and then pressing the central 

 key of the right 

touch pad, the selected submenu opens:

In order to be able to start the voice output through the 
headphone connection, at the very least the "REPEAT" 
line must be assigned to a switch. The takes place as 
described in the section "Switch and control switch 
assignments" on page 52:

   VOICE  TRIGGER

With this switch you can have the last respective voice 
trigger repeated for the duration of the time set to the left 
of the switch, as long as the assigned switch is closed:

With a switch assigned to this line, preferably one of 
the two pushbuttons SW 1 or SW 9, switch to the next 
voice output in the rotation selected in the options 
"TRANSMITTER", "RECEIVER" and "SENSOR" as 
described in the following. 

If you activate the "VARIO MODULE" line(

) in the 

"SENSOR SELECT" submenu, described on page 220, 
you can use the headphone connection to activate a 
switch assigned to this line completely independently 
of the other voice triggers, in other words voice triggers 
triggered  by changes in altitude, such as  "Slow climb/
descent", etc.

After selection of the desired menu line with the arrow 
keys 

 of the left or right touch pad...

… and then pressing the central 

 key of the right 

touch pad, the selected submenu opens:

Here, after selection of the desired line with the arrow 
keys 

 of the left or right touch pad and then 

pressing the central 

 key of the right touch pad, 

activate (

) or deactivate (

) the data output of the 

selected voice trigger: