Graupner Hendheld RC 2.4 GHz No. of channels: 12 33124 Data Sheet
Product codes
33124
226 Detail program description - Control adjust
"rear": minimum rear pitch setting, the pitch joystick
(C1) points towards the pilot.
Simultaneously pressing the keys
or of the
right touch pad (CLEAR) switches to "rear"
Notice:
The stick mode of the C1 joystick in the winged model
program for "Throttle min front/rear" can be individual
changed in the "Model type" menu.
The stick mode of the C1 joystick in the winged model
program for "Throttle min front/rear" can be individual
changed in the "Model type" menu.
Contrast
In order to guarantee the optimal visibility of the display
of the
of the
mx-20 HoTT in any weather and at any
temperature, you can adjust its contrast:
GRAUBELE
#01
2:22h
Stop
Flt
Flt
«nor mal »
K78
0:00
0:00
0:00
5.5V
5.2V
M
HoTT
GRAUBELE
#01
2:22h
Stop
Flt
Flt
«nor mal »
K78
0:00
0:00
0:00
5.5V
5.2V
M
HoTT
For this purpose, using the arrow keys
of the left or
right touch pad, select the "Contrast" line:
1
SEL
PPM10
0
Contrast
BASIC SETTINGS
Stick mode
DSC Output
Pitch min
DSC Output
Pitch min
back
Then briefl y press the central
SET
key of the right touch
pad. Now you can adjust the display contract in a range
of ±20 using the arrow keys of the right touch pad in the
inverse value fi eld.
Simultaneously pressing the arrow keys
of ±20 using the arrow keys of the right touch pad in the
inverse value fi eld.
Simultaneously pressing the arrow keys
or
of the right touch pad (CLEAR) resets the inverse fi eld
to "0".
to "0".
Display light
In this line you can determine how long the backlight of
the display should remain switched on after switching on
the transmitter or the last key actuation.
The available options are "unlim(ited), "30 s", "60 s" and
"120 s".
Simultaneously pressing the arrow keys
the display should remain switched on after switching on
the transmitter or the last key actuation.
The available options are "unlim(ited), "30 s", "60 s" and
"120 s".
Simultaneously pressing the arrow keys
or
of the right touch pad (CLEAR) sets the inverse fi eld to
"unlimited".
"unlimited".
Power-on beep
In this line you can switch the power-on beep of the
transmitter on ("yes") and off ("no").
Simultaneously pressing the arrow keys
transmitter on ("yes") and off ("no").
Simultaneously pressing the arrow keys
or
of the right touch pad (CLEAR) switch the inverse fi eld
back to "yes".
back to "yes".
Battery type
SEL
0
Ni-MH
Batter y type
Contrast
Display light
Display light
unlim.
BASIC SETTINGS
Power-on beep
yes
In this line you indicate to the transmitter whether its
power supply is provided from a four-cell NiMH battery
or a single-cell LiPo battery. Depending on this setting,
you are offered a suitable voltage range in the (next) line
"Battery warning".
Simultaneously pressing the arrow keys
power supply is provided from a four-cell NiMH battery
or a single-cell LiPo battery. Depending on this setting,
you are offered a suitable voltage range in the (next) line
"Battery warning".
Simultaneously pressing the arrow keys
or of
the right touch pad (CLEAR) switches back to "Ni-MH"
in the inverse fi eld.
in the inverse fi eld.
Battery warning threshold
SEL
Ni-MH
4.7V
Batter y type
Batter y war ning
Batter y war ning
Display light
unlim.
BASIC SETTINGS
Power-on beep
yes
You can arbitrarily specify the warning threshold for the
display ...
display ...
b a t t e r y
n e e d s
c h a r g i n g
n e e d s
c h a r g i n g
… – depending on the selection of the battery type in
the line above it – in increments of 0.1 volt between 4.5
and 5.5 V (NimH battery) or 3.4 and 4.2 V (LiPo battery.
the line above it – in increments of 0.1 volt between 4.5
and 5.5 V (NimH battery) or 3.4 and 4.2 V (LiPo battery.