Graupner Hendheld RC 2.4 GHz No. of channels: 12 33124 Data Sheet

25

 Entry  keys  ESC and SET

 Display  symbols
Displayed telemetry symbols

 

  the active model memory has not yet "bonded" 

with a HoTT receiver. More about the "Binding" 
process, see page 69 or 75.

 

  non-blinking: Switched off on RF transmitter side

blinking antenna symbol: 
The last receiver bound to the active model is 
inactive or out of range

>

M

 x  no telemetry signal to receive

>

M

    signal strength indicator

>

P

    indicator for pupil signal strength on the teacher 

transmitter display 

•  

key 

brief repeated pressing the 

 key will cause a 

stepwise return to the function selection screen or 
even further to the base screen. Any changes made 
to settings remain.
Momentarily touching the 

 key for about 1 s 

while in the base screen will open and close the 
Telemetry menu.
arrow keys 

• 

 

Momentarily pressing one of these keys will cause 

1. 

analogous paging in the given arrow direction 
through lists, e. g. through the model selection list 
or the multi-function list or within menus though 
the menu's lines. 
Simultaneous pressing on 

2. 

 will change the 

transmitter's base screen and almost any menu 
position to the "Servo display" menu.

•  

button

After switching the transmitter on, briefl y pressing 

1. 

the 

 key will cause a jump from the displayed 

base screen to the Multi-function menu. In the 
same manner a selected menu can now be called 
up with the 

 key. 

Momentarily pressing the 

2. 

 key from within 

the Basic Settings menu will activate / deactivate 
(confi rm) the given setting fi elds.

arrow keys 

• 

 

1.   "Paging" through the Multi-function menu and 

the menu lines within the Basic Settings menu 
analogous to the arrow keys of the left touch pad.

2.  Select or set parameters in setting fi elds after they 

have been activated by briefl y touching the 

 

key, whereby the 

 keys and  are used for 

the same corresponding functions. In this case it 
is completely irrelevant which of these two keys 
are used.
By briefl y pressing the 

3. 

 keys simultaneously 

or 

 an altered parameter value for the active 

entry fi eld will again be restored to its default 
value (CLEAR).