Graupner Hendheld RC 2.4 GHz No. of channels: 12 33124 Data Sheet

28

The mx-20 HoTT transmitter's "

HIDDEN MODE" can 

be reached from almost any menu position by pressing 
and holding the 

 arrow keys of the left touch pad 

and the 

 key of the right touch pad for about one 

second until the screen shown below is displayed.

 HIDDEN MODE 

The screen's contrast characteristic can be adapted as 
needed in this screen's "CONTRAST" line, as described 
in more detail on pages 226/226, by tapping on the 
center 

 key of the right touch pad. Tapping again 

on the 

 or 

 keys will cause a return to line 

selection.
The line …

… can be reached by tapping arrow key 

 in the left 

or right touch pad. One of the transmitter's available 
languages can then be selected from the screen which 
appears.

HIDDEN MODE 

Activate language selection by pressing on the center 

  HIDDEN  MODE

Language selection and display contrast

 key in the right touch pad.

HIDDEN MODE 

Now the default language "GERMAN" can be replaced 
with the desired language by making a selection with the 
arrow keys of the right touch pad. For example:

 HIDDEN MODE 

Confi rm the selection by tapping again on the center 

 key in the right touch pad. All settings stored in the 

transmitter remain intact after a change of language has 
been made.
The following languages are available for selection at 
the time this handbook was printed: 

German

• 

English

• 

French

• 
The Italian and Spanish languages are planned for 
inclusion at a later point in time. These will then be 
made available by way of an update download from the 
transmitter's web page at the Graupner website 
www.graupner.de.

As mentioned in section "Headsets" on page 21, the 
transmitter's acoustic signals as well as those signals 
and announcements associated with the telemetry 
menu can be output by way of the headset connector. 
These announcements are made in German language 
by default. These announcements are summarized in 
a voice packet which is stored in a transmitter-internal 
memory but they can be replaced by a voice packet of a 
different language at any time.
The following languages are available for selection at 
the time this handbook was printed: 

German

• 

English

• 

French

• 
The Italian and Spanish languages are planned for 
inclusion at a later point in time. These will then be made 
available on the transmitter's download web page at the 
Graupner website www.graupner.de.
The given active language packet can then be swapped 
out either with the PC program (also available as a 
download from the transmitter's web page at 
www.graupner.de) or per SD card as described below.

Preparation
If not already done, insert the SD card or SDHC card 
into the transmitter as described on page 22. Now 
when the transmitter is switched on it will perform 
some operations which will include  the creation of a 
"VoiceFile" on the memory card. 
Take this memory card, which has now been prepared 
by the transmitter, out of the transmitter and insert it 
into a suitable card reader. If necessary, attach the card 
reader to your PC or laptop. Now copy the language