Peha By Honeywell Flush-mount radio 174233 174233 Data Sheet

The AudioPoint has to be mounted permanently (e.g. in a wall). Two in-wall installation electrical outlets are needed with 

60 mm Ø. The display unit is hardwired to the lower section! The rotating display enables vertical installation or horizontal 

installation with the speaker on the right-hand side.

Important! Horizontal installation with the speaker 

on the left-hand side is not possible (4) !

–  The safety instructions must be observed at installation.

–  Before installation, check whether there is a good radio 

    reception at the installation site! 

•  Install in-wall installation electrical outlets at the suitable location vertically or horizontally. (1).

•  A second speaker can be connected to terminals 1 and 2 at the back of the speaker (5).

   Terminals 3, 4, 5 serve as the AUX-IN input for a fixed external audio source (AUX).

•  Place lower section with loose display unit in built-in sockets and secure with screws (2+3).

90°

r ┴ l

