Keba 89.849 Electric Cars KEBA 89.849 Electric Cars N/A Silver, Grey Silver, Grey 89.849 Data Sheet
Product codes
89.849
Important information
KeContact
P20
6
Installation
manual, Version: 1.41 / Article no.: 90064
© KEBA 2012-2013
!
WARNING!
Pull the charging cable only at the plug and not at the cable out of the connec-
tor.
tor.
Ensure that the charging cable is not mechanically damaged (bent, pinched or
run over) and the connection area does not come into contact with heat
sources, dirt or water.
run over) and the connection area does not come into contact with heat
sources, dirt or water.
5 safety rules:
- Shut down all poles and all sides!
- Secure against reactivation!
- Check that the equipment is voltage-free!
- Ground and short-circuit!
- Cover adjacent live parts and restrict access to hazardous areas!
- Secure against reactivation!
- Check that the equipment is voltage-free!
- Ground and short-circuit!
- Cover adjacent live parts and restrict access to hazardous areas!
ATTENTION
Risk of damage!
Make sure that the charging station is not damaged by improper handling (an-
choring, housing cover, socket, inner parts etc.).
Make sure that the charging station is not damaged by improper handling (an-
choring, housing cover, socket, inner parts etc.).
Do not open the connector panel cover in the rain!
Risk of breaking the plastic housing!
- Countersunk screws may not be used for the mounting!
- The included washers must be used.
- Do not tighten the mounting screws with force.
- The mounting surface must be completely level (max. 1 mm difference be-
tween the support points or mounting points). Warpage of the housing must be
prevented.
- Countersunk screws may not be used for the mounting!
- The included washers must be used.
- Do not tighten the mounting screws with force.
- The mounting surface must be completely level (max. 1 mm difference be-
tween the support points or mounting points). Warpage of the housing must be
prevented.
Information for technicians who are permitted to open the device:
Risk of damage!
Electronic components can be destroyed if touched!
Before handling components, make sure you perform an electrical discharge
by touching a metallic, grounded object!
Electronic components can be destroyed if touched!
Before handling components, make sure you perform an electrical discharge
by touching a metallic, grounded object!