Secuself CCTV camera FVC033 FVC033 Data Sheet

6 

Step  Description 

1 

Place  the  installation  positioning  template  on  the  installation  surface  such  as 
ceiling or wall.  

2 

Make holes in the installation surface according to the installation positioning 
template. 

3 

Insert the expansion bolts from the accessories bag into the holes you just made. 

4 

Position the IP camera base over the holes  

5 

Use the screws from the accessories bag to secure the IP camera firmly. 

6 

Loosen  the  adjust  knob  and  adjust  the  IP  camera  to  the  correct  surveillance 
position according to your actual requirements. 

7 

Secure the adjust knob to fix the IP camera.  

Powering-up the IP Camera 

1.   Connect the provided electrical power adapter to the Power port on the IP 

camera. 

2.   Connect the power adapter to an electrical outlet. When the IP camera boots 

up, the GREEN power indicator light turns on. 

Connecting the IP Camera to the Network 

The IP camera supports several network connection options including LAN and 
Wireless.

 

Connecting to a LAN Network 

Connecting the IP camera to a network using the LAN (Local Area Network) 
enables easy connection and setup with compatible APs (Access Points), e.g. 
gateway or router. 
1.   Connect the incoming network cable to the Network port on the IP camera. 
2.   Wait just a few minutes while the IP camera automatically connects to the 

RISCO Cloud. The RED network indicator light indicates that your IP camera 
is now ready for defining camera settings (Refer to Defining IP Camera 
Settings).