Tripp Lite 3.2-3.8kW Single-Phase Switched PDU, 200-240V (20-C13 & 4-C19), C20/L6-20P Cable, 0U Vertical, 70 in. PDUMV20HVNET Data Sheet

MODEL NUMBER: PDUMV20HVNET

 

 

 

Tripp Lite single phase Switched PDU / Power Distribution Unit offers advanced network control and monitoring

with the ability to turn on, turn off, recycle or lock-out power to each individual receptacle, monitor site electrical

conditions and remotely monitor output power consumption. PowerAlert interface supports remote control and

custom notification of user-specified conditions via email, secure web, SNMP, Telnet or SSH interface.

Individually switched outlets can be controlled in real-time to remotely reboot unresponsive network hardware, or

be custom programmed for user-defined power-up and power-down sequences to ensure proper startup of

interdependent IT systems and prevent inrush-related overloads as network equipment is first energized.

Unused PDU outlets can be electronically locked off to prevent the connection of unauthorized hardware. PDU

output current consumption in amps is continuously displayed locally via visual meter and remotely via

web/network interface to warn of potential overloads before critical IT mains or branch breakers trip. 

16/20A 200/208/230/240V Switched PDU with built-in web/network interface in 0U 70 inch / 178cm vertical

rackmount form factor (Agency derated to 16 amps) 

C20 inlet accepts a variety of site specific cordsets; 10 ft. / 3m L6-20P power cable included

24 switched outlets (20 C13; 4 C19)

Supports power-on, power-off or reboot of each outlet on a real-time or programmable basis

Enables reboot of locked equipment, custom power-on/power-off sequences, load-shedding of optional loads and disabling unused outlets

Network interface provides PDU control and data regarding input voltage, frequency and loading information

Digital display reports load level information in amps

Supports user-specified alarm notification thresholds

In-rack environmental reporting with optional ENVIROSENSE temperature / humidity sensor and rack access notification with up to 4 optional SRSWITCH

door sensors

DHCP/Manual configuration support

Switched 16/20A 200-240V PDU,

0U 70 in / 178cm Vertical

Rackmount format

Reports voltage, frequency &

loading information via ethernet

interface

Visual current meter; Toolless

button mount instalation

C20 inlet; 10ft / 3m L6-20P input

cable

24 switched outlets (20 C13; 4

C19) with cord retention brackets

Temperature, humidity and

contact-closure monitoring

options

TAA Compliant

Ideal for network configurations

requiring a switched, metered

and monitored PDU supporting

individual outlet rebooting, load

shedding and remote

Web/network current monitoring

of critical networking components

Rackmount PDU

L6-20P to C19 detachable input

cord

Rackmount brackets

PDUMVROTATEBRKT mounting

accessory

1 / 3