Tripp Lite 3.2-3.8kW Single-Phase ATS/Switched PDU, 200-240V Outlets (8 C13 & 2 C19), 2 C20, 12ft Cord, 1U Rack-Mount PDUMH20HVATNET Data Sheet

from the secondary input cable until power on the primary input is restored and stable

ATS configurations enable hot-swappable UPS protection when used with a single UPS and redundant UPS protection when each cord is connected to a

separate UPS system (in a two-UPS environment, the primary input cable must be supported by an online UPS with zero transfer time)

Advanced ATS configurations utilizing separate mains circuits, backup generators and separate out of phase utility power grid feeds are supported

On-board ATS processor constantly evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower

quality than the primary source

2-7 millisecond transfer time 

Switched outlets and ethernet interface supports individual outlet control on a real-time or programmable basis and user-specified alarm notification

thresholds for all reported site power conditions

DHCP/Manual configuration support

Supports HTTP, HTTPS, PowerAlert Network Management System, SMTP, SNMPv1, SNMPv2, SNMPv3, Telnet, SSH, FTP, DHCP, BOOTP, NTP

protocols

Outlets are factory programmed for sequential turn-on at 250 millisecond intervals when the PDU is first energized

LEDs confirm power availability on both input lines and for each output receptacle

 TAA Compliant Version Available - Order Tripp Lite PDUMH20HVATNTAA 

Style

Rackmount

PDU Type

Auto-Transfer Switch; Switched

Output Capacity Details

3.33kW (208V), 3.52kW (220V), 3.68kW (230V), 3.84kW (240V), 3.2kW (200V); 20A maximum (Agency de-rated to
16A continuous)

Frequency Compatibility

50 / 60 Hz

Output Receptacles

(8) C13; (2) C19

Output Nominal Voltage

200-240V nominal, single phase

Overload Protection

n/a

Outlet Type

IEC-C13, IEC-C19

Customized Load Management
Receptacles

8 individually switched C13 output receptacles

PDU Input Voltage

200; 208; 220; 230; 240

Recommended Electrical Service

20A 208/240V; 16A 230V

Maximum Input Amps

20

Maximum Input Amps Details

Agency de-rated to 16A continuous

Input Connection Type

Two labelled C20 inlets support Primary and Secondary input connections - two 12 ft. / 3.7m C19 to C20 power
cables included

2 / 4