Intel 1.00 GHz BX80530F1000256 Data Sheet

Product codes
BX80530F1000256
Page of 128
68
 
Datasheet
Intel
®
 Celeron
®
 Processor up to 1.10 GHz
4.1.1
Thermal Diode
The Celeron processor incorporates an on-die diode that can be used to monitor the die 
temperature. A thermal sensor located on the motherboard or a standalone measurement kit may 
monitor the die temperature of the Intel Celeron processor for thermal management purposes. 
 provide the diode parameter and interface specifications.
Note:
The reading of the thermal sensor connected to the thermal diode will not necessarily reflect the 
temperature of the hottest location on the die. This is due to inaccuracies in the thermal sensor, on-
die temperature gradients between the location of the thermal diode and the hottest location on the 
die at a given point in time, and time based variations in the die temperature measurement. Time 
based variations can occur when the sampling rate of the thermal diode (by the thermal sensor) is 
slower than the rate at which the T
junction
 temperature can change.
NOTES:
1. Intel does not support or recommend operation of the thermal diode under reverse bias.
2. At room temperature with a forward bias of 630 mV.
3. n_ideality is the diode ideality factor parameter, as represented by the diode equation: 
 I-Io(e (Vd*q)/(nkT) – 1).
4. Not 100% tested. Specified by design characterization. 
NOTES:
1. Intel does not support or recommend operation of the thermal diode under reverse bias.
2. Characterized at 100
°
 C with a forward bias current of 5–300 
µ
A.
3. The ideality factor, n, represents the deviation from ideal diode behavior as exemplified by the diode 
equation: 
I
fw
=Is(e^ ((Vd*q)/(nkT)) – 1), where Is = saturation current, q = electronic charge, Vd = voltage across the 
diode, k = Boltzmann Constant, and T = absolute temperature (Kelvin).
4. Not 100% tested. Specified by design characterization.
Table 42.  Thermal Diode Parameters (S.E.P. and PPGA Packages)
Symbol
Min
Typ
Max
Unit
Notes
I
forward bias
5
500
uA
1
n_ideality
1.0000
1.0065
1.0173
2,3
Table 43.  Thermal Diode Parameters (FC-PGA/FC-PGA2 Packages)
Symbol
Min
Typ
Max
Unit
Notes
I
forward bias
5
300
uA
1
n_ideality
1.0057
1.0080
1.0125
2, 3
Table 44.  Thermal Diode Interface
Pin Name
SC242 Connector 
Signal #
370-Pin Socket Pin #
Pin Description
THERMDP
B14
AL31
diode anode (p junction)
THERMDN
B15
AL29
diode cathode (n junction)