Intel 4 HT 631 80552PG0802M2M Data Sheet

Datasheet

95

 

The Intel Pentium 4 processors will be offered as an Intel boxed processor. Intel boxed 

processors are intended for system integrators who build systems from largely 

standard components. The boxed Intel Pentium 4 processor will be supplied with a 

cooling solution known as the Thermal Module Assembly (TMA). Each processor will be 

supplied with one of the two available types of TMAs – Type I or Type II. This chapter 

documents motherboard and system requirements for both the TMAs that will be 

supplied with the boxed Pentium 4 processor in the 775-land package. This chapter is 

particularly important for OEMs that manufacture motherboards for system integrators. 

 shows a mechanical representation of a boxed Pentium 4 processor in the 

775-land package with a Type I TMA. 

 

illustrates a mechanical representation 

of a boxed Pentium 4 processor in the 775-land package with Type II TMA.

Unless otherwise noted, all figures in this chapter are dimensioned in millimeters and 

inches [in brackets].

Drawings in this section reflect only the specifications on the Intel boxed processor 

product. These dimensions should not be used as a generic keep-out zone for all 

cooling solutions. It is the system designer’s responsibility to consider their proprietary 

cooling solution when designing to the required keep-out zone on their system 

platforms and chassis. Refer to the appropriate processor Thermal and Mechanical 

Design Guidelines (see 

) for further guidance.