Intel R2000BB4GS9 Data Sheet
Intel
®
Server System R2000BB Product Family TPS
Revision 2.0
39
6.3 Optical Drive Support
Systems configured with eight 3.5” hard drive bays or up to sixteen 2.5” hard drive bays also include support
for an optical drive bay ‘A’ as illustrated below.
for an optical drive bay ‘A’ as illustrated below.
Figure 29. Optical Drive Support
A 2x3 pin power connector on the server board labeled “ODD/SSD PWR” is designed to provide power to a
SATA SSD or SATA optical drive using the supplied power cable. SATA signals for one SATA device is
cabled from the white 7-pin single port AHCI SATA connector labeled “AHCI_SATA_1” on the server board.
SATA SSD or SATA optical drive using the supplied power cable. SATA signals for one SATA device is
cabled from the white 7-pin single port AHCI SATA connector labeled “AHCI_SATA_1” on the server board.