Intel R2000BB4GS9 Data Sheet
Intel
®
Server System R2000BB Product Family TPS
40
Revision 2.0
6.4 Internal – Fixed Mount Solid State Drive (SSD) Support
The system can support one internal fixed mount 2.5” Solid State Drive (SSD). The drive is attached via 4-
attachment screws to the top side of the air duct.
attachment screws to the top side of the air duct.
Figure 30. 2.5" Internal Fixed Mount Solid State Drive (SSD) Mounting Option
A 2x3 pin power connector on the server board labeled “ODD/SSD PWR” is designed to provide power to the
SSD. SATA signals for a single SATA device can be cabled from the white 7-pin AHCI SATA connector on
the server board.
SSD. SATA signals for a single SATA device can be cabled from the white 7-pin AHCI SATA connector on
the server board.
NOTES: Mounting standard mechanical hard disk drives to the air duct is NOT a supported configuration.
Mounting hard disk drives to the air duct may cause data loss, performance degradation, and premature drive
failures.
Mounting hard disk drives to the air duct may cause data loss, performance degradation, and premature drive
failures.