Saeco Super-automatic espresso machine HD8750/18 HD8750/18 Data Sheet

Product codes
HD8750/18
Page of 48
40
ENGLISH
Machine actions 
Causes 
Solutions
The machine grinds the 
coff ee beans but no coff ee 
comes out.
(See note) 
There is no water.
Fill the water tank and prime the 
circuit (see the "Using the Machine 
for the First Time" section).
The brew group is dirty.
Clean the brew group (see the 
"Weekly Cleaning of the Brew 
Group" section).
The circuit is not primed.
Prime the circuit (see the "Using the 
Machine for the First Time" section).
This might occur when the 
machine is automatically 
adjusting the dose.
Brew a few cups of coff ee as 
described in the "Saeco Adapting 
System" section.
The dispensing spout is dirty.
Clean the dispensing spout.
Coff ee is too weak.
(See note)
This might occur when the 
machine is automatically 
adjusting the dose.
Brew a few cups of coff ee as 
described in the "Saeco Adapting 
System" section.
Coff ee is brewed slowly.
(See note)
The coff ee grind is too fi ne.
Change coff ee blend or adjust the 
grind as explained in the "Adjusting 
the Coff ee Grinder" section.
The circuit is not primed.
Prime the circuit (see the "Using the 
Machine for the First Time" section).
The brew group is dirty.
Clean the brew group (see the 
"Weekly Cleaning of the Brew 
Group" section).
Coff ee leaks out of the 
dispensing spout.
The dispensing spout is clogged.
Clean the dispensing spout and its 
holes.
 Note: 
These problems can be considered normal if the coff ee blend has been 
changed or if the machine has just been installed. In this case wait until the 
machine performs a self-adjusting operation as described in the "Saeco 
Adapting System" chapter.