Nortel Networks Calculator n0060597 User Manual
Chapter 3 Upgrading to BCM 4.0 and SRG 1.5
29
Upgrade Guide
Upgrade Wizard BCM status indicators
The indicators in the BCM Status box on the transfer/upgrade page change as the transfer and
upgrade process progresses (see
upgrade process progresses (see
Figure 12 BCM status indicators
Table 3 BCM status indicators
BCM Connection
LEDs
BCM Services
•
indicates that the application is connected to the
BCM system and can communicate with it.
BCM system and can communicate with it.
Green
•
indicates that the BCM is functioning and is
providing all expected capabilities.
providing all expected capabilities.
•
appears if there is no connection available to the
BCM system, which is normal during some stages
of the upgrade process.
BCM system, which is normal during some stages
of the upgrade process.
•
appears during any reboot that occurs during the
upgrade.
upgrade.
•
appears if the network connection is disconnected
between your computer and the BCM system.
between your computer and the BCM system.
•
appears if the BCM system is powered down or in
the middle of a power cycle.
the middle of a power cycle.
Red
•
appears during periods when there is no
access to services on the BCM system.
access to services on the BCM system.
•
appears any time the BCM Connection
indicator is red.
indicator is red.
•
appears once the system modifications begin.
It remains red until the upgrade is complete
and all the services have restarted.
It remains red until the upgrade is complete
and all the services have restarted.
Note: This LED is generally red from the start of
the upgrade process through to completion.
the upgrade process through to completion.
Indicate the current state of BCM
connectivity and service availability
connectivity and service availability