Nortel Networks Calculator n0060597 User Manual
Chapter 1 Getting started
9
Upgrade Guide
No longer supported by BCM 4.0 software
The following items are not supported by BCM 4.0 software:
•
Companion, European Matra DECT, and Symbol: Keycodes are unavailable for BCM 4.0
and these telephones will no longer function.
and these telephones will no longer function.
•
PPTP functionality: Point-to-point tunneling protocol (PPTP) for VPN access is no longer
supported. BCM 4.0 provides support for IPSec as the preferred VPN solution.
supported. BCM 4.0 provides support for IPSec as the preferred VPN solution.
•
Voice Applications: CallPilot Mailbox Manager and Operator Manager, previously available
through the Unified Messaging interface, are no longer available through a graphical user
interface. This functionality can be accessed through Telset administration (see BCM 4.0
Telset Administration Guide).
through the Unified Messaging interface, are no longer available through a graphical user
interface. This functionality can be accessed through Telset administration (see BCM 4.0
Telset Administration Guide).
•
BCM 3.6/3.7 wizards: The wizards available in BCM 3.6/3.7 are replaced with similar
functionality in BCM 4.0:
functionality in BCM 4.0:
— The Quick Start wizard is replaced by the Startup Profile in BCM 4.0.
— The Add New Users wizard functionality is accomplished using Element Manager.
— The Edit DN Record Template functionality is accomplished using Element Manager.
— The DN Renumber functionality is accomplished using Element Manager.
— The Network Update functionality is accomplished using Element Manager.
— DECT configuration and DECT mobile wizards are no longer available for Matra DECT
since Matra DECT is not supported in BCM 4.0 (Kirk DECT is supported).
•
COPS protocol: The ability to configure quality of service queue policies using the COPS
protocol is no longer supported. The synoptics MIBs supported on BCM 3.6/3.7 for this
purpose have also been removed.
protocol is no longer supported. The synoptics MIBs supported on BCM 3.6/3.7 for this
purpose have also been removed.
•
Partial double density: Partial double density (PDD) was used to support Companion
telephones (through buses 6 and 7). Since Companion is no longer supported, PDD is not
required and all buses are full double density (FDD).
telephones (through buses 6 and 7). Since Companion is no longer supported, PDD is not
required and all buses are full double density (FDD).
Using this upgrade guide
This section explains how to use the information in this guide.
Ensure that you read all the instructions carefully before attempting the upgrade.
First step
•
Read the sections in
about prerequisites and
pre-upgrade tasks.
•
Read
before performing the
upgrade.
•
After you read this information and are certain that your system is ready to be upgraded, go to
the Second step.
the Second step.