Source Technologies Secure MICR Printer ST9510 User Manual

ST Secure MICR Printer User’s Guide

2006, Source Technologies

March 2006

1. If you are using a printer driver that is set to 600 DPI, the printer data stream should

include a Unit of Measure PCL command set to 600. The command is
<ESC>&u600D

2. If the application controls the printer data stream, add the Unit of Measure command

early in the data stream. The command also affects X & Y positioning commands.
Add <ESC>&u600D

3. After calling the E-13B MICR font, issue a HMI (Horizontal Motion Index) command

set to 8 characters per inch. The command must be included with every E-13B
MICR font call using either the Selection String or ID call. The command string is:

<ESC>(10O<ESC>(s0p8h8v0s7b360T<ESC>&k15H font data The Selection String

<ESC>(30802X<ESC>&k15H font data

The ID Call

See Font Mapping Appendix pages for specific character set data for each font.

PJL INFO MICR COMMAND

The ST Secure MICR Printer supports an optional custom bi-directional PJL Inquiry
Command. The command provides printer information and cartridge information for network
management. The command format is; @PJL INFO MICR

The command should be sent with UEL (Universal Exit Language) commands. Example:

<ESC>%-12345X

UEL

@PJL INFO MICR

INFO MICR Command

<ESC>%-12345X

UEL

The following data is returned

@PJL INFO MICR
PRINTER STATE = READY

= BUSY

= NOT READY

SERIAL NUMBER = XXXXXXXX

PAGECOUNT = 123456

CARTRIDGE TYPE = NORMAL

= MICR

CARTRIDGE STATUS = UNKNOWN

LOW

EMPTY

CARTRIDGE SERIAL# = XXXXXXXX
TONER LEVEL

= 0-9

UNKNOWN

CARTRIDGE COUNT = XXXX
LOW THRESHOLD = XXXX
EMPTY THRESHOLD = XXXX